Product image 1
FEULING PARTS

Race Series® Short-Travel Hydraulic Lifters

Manufacturer Code4018ST
Product CodeCHM-FEULINGP-4018ST
  • New revolutionary design with 0.115" of total travel vs. a full travel lifter with 0.200"
  • Increases RPM by decreasing valve float and valve-train harmonics while maintaining a quiet engine
  • Travel reduction reduces the amount of oil that is required to fill the inside of the lifter which reduces oil aeration inside the lifter on steep, fast action high lift camshaft lobes
  • When oil aeration is present inside the lifter, the pushrod seat drops when the lifter rolls onto the front cam lobe ramp after squeezing the aeration down thus creating a noisy poor performing lifter
  • Short travel lifters should be set with 0.065" - 0.070" of pre-load and with the normal engine growth from heat will put the operating lifter pre load at or around half travel
  • Machined from a steel body and designed to exceed the needs of large lift camshafts and higher valve spring pressures with a slower bleed down rate
  • Compatible with either Feuling® HP+® or Race Series® oil pumps and are designed for use with both street and strip engines
  • Maintain proper oil flow to the top end, increase engine RPM, valve-train stability, decreasing valve float promoting maximum valve lift
  • Precision ground needle roller bearing with high chromium steel axle for long life and minimal friction
  • High-flow disc-style quick-reacting check valve for better reaction at higher RPM
  • Spin-Tron dyno developed and track proven
  • Made in the USA
  • Feuling® recommends pumping up each lifter by hand prior to installation, to remove all air and provide a fully pumped up lifter. Use of a thin weight oil like ATF in a squirt can works well.
  • Feuling® recommends Race Series® lifters for engines running higher than 185 lb (84 kg) valve spring seat pressure.
  • Feuling® recommends the use of a high volume oil pump which will result in quieter, better performing lifters.


    • Vehicle fitment

    Select your vehicle in the bar above to check if this part fits.

    This part is compatible with 77 motorcycle models.
    • HARLEY DAVIDSON FLDE 1750 ABS2018–2020
    • HARLEY DAVIDSON FLFB 1750 ABS2018–2020
    • HARLEY DAVIDSON FLFBS 1868 ABS2018–2024
    • HARLEY DAVIDSON FLFBS 1923 ABS2025–2026
    • HARLEY DAVIDSON FLH 1868 ABS2021
    • HARLEY DAVIDSON FLHC 1750 ABS2018–2022
    • HARLEY DAVIDSON FLHCS 1868 ABS2018–2024
    • HARLEY DAVIDSON FLHCS 1923 ABS2025–2026
    • HARLEY DAVIDSON FLHFB 1868 ABS2023
    • HARLEY DAVIDSON FLHR 17502017–2019
    • HARLEY DAVIDSON FLHR 1750 ABS2017–2022
    • HARLEY DAVIDSON FLHRC 1750 ABS2017–2019
    • HARLEY DAVIDSON FLHRXS 1750 ABS2017–2018
    • HARLEY DAVIDSON FLHRXS 1868 ABS2019–2025
    • HARLEY DAVIDSON FLHT 1750 ABS2019–2022
    • HARLEY DAVIDSON FLHTCU 1750 ABS2017–2019
    • HARLEY DAVIDSON FLHTCUTG 17502017–2018
    • HARLEY DAVIDSON FLHTCUTG 1750 ABS2019
    • HARLEY DAVIDSON FLHTCUTG 1868 ABS2020–2025
    • HARLEY DAVIDSON FLHTCUTGSE 1923 ABS2020–2022
    • HARLEY DAVIDSON FLHTK 1750 ABS2017–2018
    • HARLEY DAVIDSON FLHTK 1868 ABS2019–2024
    • HARLEY DAVIDSON FLHTKL 1750 ABS2017–2018
    • HARLEY DAVIDSON FLHTKL 1868 ABS2019
    • HARLEY DAVIDSON FLHTKSE 1868 ABS2017
    • HARLEY DAVIDSON FLHTKSE 1923 ABS2018–2021
    • HARLEY DAVIDSON FLHX 17502017–2019
    • HARLEY DAVIDSON FLHX 1750 ABS2017–2023
    • HARLEY DAVIDSON FLHX 1923 ABS2024–2026
    • HARLEY DAVIDSON FLHXL 1923 ABS2026
    • HARLEY DAVIDSON FLHXS 1750 ABS2017–2018
    • HARLEY DAVIDSON FLHXS 1868 ABS2019–2023
    • HARLEY DAVIDSON FLHXSE 1868 ABS2017
    • HARLEY DAVIDSON FLHXSE 1923 ABS2018–2022
    • HARLEY DAVIDSON FLHXSE 1977 ABS2023–2024
    • HARLEY DAVIDSON FLHXST 1923 ABS2022–2023
    • HARLEY DAVIDSON FLI 1868 ABS2024
    • HARLEY DAVIDSON FLRT 17502017–2018
    • HARLEY DAVIDSON FLRT 1750 ABS2019
    • HARLEY DAVIDSON FLRT 1868 ABS2020–2025
    • HARLEY DAVIDSON FLSB 1750 ABS2018–2024
    • HARLEY DAVIDSON FLSL 1750 ABS2018–2021
    • HARLEY DAVIDSON FLSTFI 1923 ABS2025–2026
    • HARLEY DAVIDSON FLTRK 1868 ABS2020–2024
    • HARLEY DAVIDSON FLTRKSE 1923 ABS2022–2023
    • HARLEY DAVIDSON FLTRT 1868 ABS2023–2025
    • HARLEY DAVIDSON FLTRU 1750 ABS2017–2018
    • HARLEY DAVIDSON FLTRU 1868 ABS2019
    • HARLEY DAVIDSON FLTRX 17502017–2019
    • HARLEY DAVIDSON FLTRX 1750 ABS2017–2023
    • HARLEY DAVIDSON FLTRX 1923 ABS2024–2026
    • HARLEY DAVIDSON FLTRXL 1923 ABS2026
    • HARLEY DAVIDSON FLTRXS 1750 ABS2017–2018
    • HARLEY DAVIDSON FLTRXS 1868 ABS2019–2023
    • HARLEY DAVIDSON FLTRXSE 1923 ABS2018–2022
    • HARLEY DAVIDSON FLTRXSE 1977 ABS2023–2024
    • HARLEY DAVIDSON FLTRXST 1923 ABS2022–2023
    • HARLEY DAVIDSON FLTRXSTSE 1977 ABS2024
    • HARLEY DAVIDSON FXBB 1750 ABS2018–2020
    • HARLEY DAVIDSON FXBB 1923 ABS2025–2026
    • HARLEY DAVIDSON FXBBS 18682021
    • HARLEY DAVIDSON FXBBS 1868 ABS2021–2024
    • HARLEY DAVIDSON FXBR 1750 ABS2018–2020
    • HARLEY DAVIDSON FXBR 1923 ABS2023–2026
    • HARLEY DAVIDSON FXBRS 1868 ABS2018–2022
    • HARLEY DAVIDSON FXD 1923 ABS2026
    • HARLEY DAVIDSON FXDR 1868 ABS2019
    • HARLEY DAVIDSON FXDRS 1868 ABS2020
    • HARLEY DAVIDSON FXFB 1750 ABS2018–2019, 2021
    • HARLEY DAVIDSON FXFBS 1868 ABS2018–2023
    • HARLEY DAVIDSON FXLR 1750 ABS2018–2020
    • HARLEY DAVIDSON FXLRS 1868 ABS2020–2021
    • HARLEY DAVIDSON FXLRS 1923 ABS2022–2026
    • HARLEY DAVIDSON FXLRST 1923 ABS2022–2026
    • HARLEY DAVIDSON FXRST 1923 ABS2022
    • HARLEY DAVIDSON FXST 17502021
    • HARLEY DAVIDSON FXST 1750 ABS2020–2024
    On demand
    Delivery time determined after consultation
    RON 2,304.16
    • Secure online paymentCard payments are processed securely by Stripe.
      stripe
    • Pay in instalments with KlarnaChoose Klarna at checkout.
      Klarna.

    Specificații

    Specificații

    Size+0,843" - 0,8435"
    TypeHydraulic
    ModelRace Series®
    StyleShort-Travel
    UnitsSet of 4
    MaterialSteel
    ApplicationExhaust| Intake
    Product NameLifter
    Riding StyleStreet
    Size Imperial+0.843" - 0.8435"
    Research ValueFinalized