
Specificații
Specificații
TypeChain Drive
Grind487 Series
ModelReaper
UnitsKit
ApplicationWater Cooled
Intake Lift0,478"
Intake Open20,5°
Exhaust Lift0,487"
Exhaust Open44°
Intake Close37°
Product NameCamchest Kit
Riding StyleStreet
Exhaust Close17,5°
Research ValueFinalized
Intake Duration237°
Exhaust Duration241,5°
Intake Lift at TDC0,180"
Exhaust Lift at TDC0,146"
Intake Lift Imperial0.478"
Intake Open Imperial20.5°
Exhaust Lift Imperial0.487"
Exhaust Open Imperial44°
Intake Close Imperial37°
Exhaust Close Imperial17.5°
Intake Lobe Centerline98,5°
Exhaust Lobe Centerline103,25°
Intake Duration Imperial237°
Exhaust Duration Imperial241.5°
Intake Lift at TDC Imperial0.180"
Exhaust Lift at TDC Imperial0.146"
Intake Lobe Centerline Imperial98.5°
Exhaust Lobe Centerline Imperial103.25°
FEULING PARTS487 Reaper® Chain Drive Camshaft, Cam Installation Kit, Race Series® Lifters, One Piece Pushrod, Race Series® Oil Pump, High Flow Camplate, and ARP Rocker Studs and Nuts, Camplate/Oil Pump Fasteners are included in this kit 487 Reaper Camshaft Bolt-in Chain Drive Camshaft for 114" and 117" engine Responds very well to increased bore and or compression Maintains bottom end power and pulls hard above 2,950 rpm when compared to stock RPM range 2,250 - 6,100 Cam specs measured in the engine on the lifter @ 0.050 using a 1.61 rocker arm ratio. Cam Installation Kit Includes cam bearing, cam/crank hardware and gasket/O-ring kit Race Series® Full-Travel Lifters Hydraulic roller lifters, standard OD (0.8420-0.8423) Hydraulic lifters have a full .200 of total travel designed with a slower bleed down rate to handle heavy valve spring pressures One Piece Pushrods Heavy duty 7/16 diameter tube with 0.165 wall thickness, precision concentricity, heat treated with a black oxide finish Race Series® Oil Pump Increase oil pressure, scavenge volume and engine oil flow 30% more pressure gear volume over stock 53% more scavenge gear volume over stock 42% more scavenge volume with port sizing, matched passages and holes to the engine case 46% more oil volume to the crankshaft and connecting rod bearing 15°- 25° cooler engine temperatures 15°- 30° cooler oil temperatures 10-30 more PSI of oil pressure Reduces wet sumping, blow by and oily air cleaners Magnets in oil pump to help protect gears and pressure relief valve Rear wheel power gains of 2 horsepower and 2 ft. lb. of torque are achieved. FEULING test results show a 50% reduction of engine sump oil level. High Flow Camplate Billet 7075 aluminum Bolts into stock location Made in the USA Cam specs measured on the lifter @ 0.050" using a 1.61 rocker arm ratio. Feuling does not recommend tuning beyond stock emissions standards. Not for VVT water cooled engines.
Kit Includes:
• 487 Reaper Chain Drive Camshaft
• Cam Installation Kit
• Race Series® Lifters
• One Piece HP+® Pushrods
• Race Series® Oil Pump
• High Flow Camplate
• ARP Rocker Studs and Nuts
• Camplate/Oil Pump Fasteners
Race Series® Camchest Kit
Cod Producător7273
Cod ProdusCHM-FEULINGP-7273
Compatibilitate vehicul
Selectează-ți vehiculul în bara de sus pentru a verifica dacă această piesă se potrivește.
Această piesă este compatibilă cu 25 modele de motociclete.
- HARLEY DAVIDSON FLHTCUTG 17502017–2018
- HARLEY DAVIDSON FLHTCUTG 1750 ABS2019
- HARLEY DAVIDSON FLHTCUTG 1868 ABS2020–2025
- HARLEY DAVIDSON FLHTCUTGSE 1923 ABS2020–2022
- HARLEY DAVIDSON FLHTK 1750 ABS2017–2018
- HARLEY DAVIDSON FLHTK 1868 ABS2019–2024
- HARLEY DAVIDSON FLHTKL 1750 ABS2017–2018
- HARLEY DAVIDSON FLHTKL 1868 ABS2019
- HARLEY DAVIDSON FLHTKSE 1868 ABS2017
- HARLEY DAVIDSON FLHTKSE 1923 ABS2018–2021
- HARLEY DAVIDSON FLHXSE 1868 ABS2017
- HARLEY DAVIDSON FLHXSE 1923 ABS2018–2022
- HARLEY DAVIDSON FLTRK 1868 ABS2020–2024
- HARLEY DAVIDSON FLTRKSE 1923 ABS2022–2023
- HARLEY DAVIDSON FLTRU 1750 ABS2017–2018
- HARLEY DAVIDSON FLTRU 1868 ABS2019
- HARLEY DAVIDSON FLTRX 1750 ABS2023
- HARLEY DAVIDSON FLTRX 1923 ABS2025
- HARLEY DAVIDSON FLTRXRRSE 2147 ABS2025
- HARLEY DAVIDSON FLTRXSE 1923 ABS2018–2022
- HARLEY DAVIDSON FLTRXSTSE 1977 ABS2024–2025
- HARLEY DAVIDSON RA 1250 ABS2021–2024
- HARLEY DAVIDSON RA 1250 S ABS2021–2024
- HARLEY DAVIDSON RA 1250 SE ABS2024
- HARLEY DAVIDSON RH 1250 S ABS2021–2024
La comandă
Termenul de livrare se stabilește după consultare
RON 13,468.87
- Plată online securizatăPlățile cu cardul sunt procesate în siguranță prin Stripe.stripe
- Plătește în rate cu KlarnaAlege Klarna la finalizarea comenzii.Klarna.
Specificații
Specificații
TypeChain Drive
Grind487 Series
ModelReaper
UnitsKit
ApplicationWater Cooled
Intake Lift0,478"
Intake Open20,5°
Exhaust Lift0,487"
Exhaust Open44°
Intake Close37°
Product NameCamchest Kit
Riding StyleStreet
Exhaust Close17,5°
Research ValueFinalized
Intake Duration237°
Exhaust Duration241,5°
Intake Lift at TDC0,180"
Exhaust Lift at TDC0,146"
Intake Lift Imperial0.478"
Intake Open Imperial20.5°
Exhaust Lift Imperial0.487"
Exhaust Open Imperial44°
Intake Close Imperial37°
Exhaust Close Imperial17.5°
Intake Lobe Centerline98,5°
Exhaust Lobe Centerline103,25°
Intake Duration Imperial237°
Exhaust Duration Imperial241.5°
Intake Lift at TDC Imperial0.180"
Exhaust Lift at TDC Imperial0.146"
Intake Lobe Centerline Imperial98.5°
Exhaust Lobe Centerline Imperial103.25°
Produse similare
RICK'S MOTORSPORT ELECTRICGarnitură de înlocuire pentru capacul statorului
223,34 RONLa comandă
S&S CYCLEGasket Kit 4.25Bore .030 Head/
1.221,64 RONLa comandă
COMETICKit garnituri complet
1.485,95 RONÎn stoc
COMETICKit garnitură chiulasă
290,77 RONÎn stoc
COMETICKit garnituri pentru partea superioară
290,77 RONÎn stoc
NARAKUSet garnituri
33,4 RONÎn stoc
S&S CYCLEGasket Head Water&OilCool .030
325,44 RONLa comandă
COMETICKit garnituri complet
1.283,33 RONÎn stoc